Firmware Upgrade

Blocks in file

This is for 2.5.1.0 of DS1000E.

• It seems each "module" is separate in the firmware upgrade file, with one ZEROFILL after each code one (if BSS data is needed.)
• The only INIT block contains the same bytes as the one preceding it.
  • It initializes settings for SDRAM.
    • EBIU_SDRRC = 0x0FFF
    • EBIU_SDBCTL = 0x11 (EBE | EBSZ_16MB | EBCAW_9BITS)
    • EBIU_SDGCTL = 0x0091998D
    • EBIU_AMGCTL = 4 (AMBEN_0_1)
• Things up to 0x0800 0000 are in SDRAM.
• 0xFF80 6000 – 0xFF80 8000 are in Data bank A SRAM
• 0xFFA0 8000 and up is Instruction SRAM

File	Mem	Size	Flags
0x1f	0xff800060	0x4	IGNORE
0x2d	0xffa08000	0x98	0x0
0xcf	0xffa08000	0x2	INIT, contains the same data as 0x2d.
0xdb	0xff800060	0x4	IGNORE
0xe9	0x4	0xfffe	0x0
...
0xf0161	0xeffe6	0x2b2	0x0
0xf041d	0x19e000	0x192	0x0
0xf05b9	0x608800	0xfffe	0x0
0x1005c1	0x6187fe	0xe920	0x0
0x10eeeb	0x680000	0xfffe	0x0
0x11eef3	0x68fffe	0x4cae	0x0
0x123bab	0x6c0000	0x4	0x0
0x123bb9	0x6c0008	0xd6	0x0
0x123c99	0x6c00de	0x10	ZEROFILL
...
0x143175	0xff806000	0xf34	0x1
0x14317f	0xff806f34	0x2	0x0
0x14318b	0xff806f36	0x402	0x1
0x143195	0xff807338	0x2	0x0
0x1431a1	0xff80733a	0x3e4	0x1
0x1431ab	0xff80771e	0x2	0x0
0x1431b7	0xff807720	0x336	0x1
0x1431c1	0xff807a56	0x2	0x0
0x1431cd	0xffa08000	0x156	0x0
0x14332d	0xffa08158	0x6954	FINAL