Difference between revisions of "Patch your Firmware"
| Line 16: | Line 16: | ||
* A original Rigol firmware image (DS1000EUpdate.RGL) version 02.05.02.00 with a md5sum of 9c28690d8d5a5690b7340fda943f5549. | * A original Rigol firmware image (DS1000EUpdate.RGL) version 02.05.02.00 with a md5sum of 9c28690d8d5a5690b7340fda943f5549. | ||
| − | |||
| + | There is a patch script in the examples/rwpatch/ subdirectory of the toolchain. | ||
| + | Copy your firmware image to <toolchain>/examples/rwpatch/DS1000EUpdate.RGL (<toolchain> is the path where you installed the rigol toolchain), switch to this directory and do a | ||
| + | |||
| + | <pre> | ||
| + | make patch | ||
| + | </pre> | ||
| + | When all is working correct you get the response: | ||
| + | |||
| + | <pre> | ||
| + | ... | ||
| + | </pre> | ||
| + | |||
| + | The resulting firmware should have the md5sum xxx. | ||
| + | Now you can copy the patched firmware image to a usb stick and flash it to your oscilloscope. | ||
| + | |||
| + | <span style="color:red;"> | ||
| + | {{warning|ATTENTION !!! | ||
| + | This will possibly void your warranty or damage your oscilloscope. <br> | ||
| + | Make sure your oscillsocope will work with version 02.05.02.00 of the original firmware BEFORE you flash the image. We are not responsable for any damage happens on your device.}} | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Revision as of 16:03, 22 December 2011
- Sorry, not complete yet...
Download the Toolchain from https://github.com/krater/rigol-toolchain
and follow the instructions in the README file...
Before you can start to develop your own software, you need a possibility to upload and start it on your Rigol device. Because the original firmware doesn't offers this possibility, we must patch some things to open the door to the memory.
For this job you need
- The completly installed Blackfin and Rigol toolchain (follow the instructions here)
- A installed md5sum tool
- A original Rigol firmware image (DS1000EUpdate.RGL) version 02.05.02.00 with a md5sum of 9c28690d8d5a5690b7340fda943f5549.
There is a patch script in the examples/rwpatch/ subdirectory of the toolchain.
Copy your firmware image to <toolchain>/examples/rwpatch/DS1000EUpdate.RGL (<toolchain> is the path where you installed the rigol toolchain), switch to this directory and do a
make patch
When all is working correct you get the response:
...
The resulting firmware should have the md5sum xxx. Now you can copy the patched firmware image to a usb stick and flash it to your oscilloscope.
| ATTENTION !!!
This will possibly void your warranty or damage your oscilloscope. |
compile firmware example
get firmware image
patch firmware
upload to scope
Then:Start_Development
