Rigol Homebrew Wiki - User contributions [en]

General Information

2012-01-07T11:44:05Z

Tgaz: /* Command interface */

== Hardware ==
;CPU: [http://www.analog.com/pr/ADSP-BF531 ADSP-BF531]
;Memory:
:Flash EPROM: [http://www.alldatasheet.com/datasheet-pdf/pdf/211252/SPANSION/S29GL064N90TFI040.html S29GL064N90TFI04] - 8MB, 16Bit, DS1052E dump[http://www.eevblog.com/forum/index.php?action=dlattach;topic=30.0;attach=1920]
:Sample RAM: [http://www.issi.com/pdf/61LPS25632TD.pdf IS61LPS25636A-200] - 256kx36, 200MHz @ 250MHz
:Config FRAM: [http://www.ramtron.com/products/nonvolatile-memory/serial-product.aspx?id=55 FM24CL04B] - 4kb non volatile ferroelectric memory, DS1052E dumps[http://www.eevblog.com/forum/index.php?topic=30.msg2783#msg2783][http://www.eevblog.com/forum/index.php?topic=30.msg2788#msg2788]
:SDRAM: [http://www.hynix.com/inc/pdfDownload.jsp?path=/datasheet/pdf/consumer/H57V1262GTR_Series(Rev.1.0).pdf H57V1262GTR] - 4x2x16 Mb (16 MB)
;A/D Converter
:5x [http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad9288/products/product.html AD9288-40] - 8-Bit, 40MHz MSPS Dual A/D Converter @100MHz
;A/D Driver: [http://www.national.com/ds/LM/LMH6552.pdf LMH6552] or [http://www.national.com/ds/LM/LMH6552.pdf LMH6553][http://www.eevblog.com/forum/index.php?topic=30.msg2107#msg2107]?
;A/D references: [http://www.eevblog.com/forum/index.php?topic=30.msg22457#msg22457 Multiplexed DAC]
;Programmable Logic:
:FPGA: Altera Cyclone III EP3C5F256C8N
:CPLD: Lattice Mach XO LCMX0256C-3TN100C
;Logic analyzer driver: National Semi DS90LV047A[http://www.rcgroups.com/forums/showpost.php?p=11714369&postcount=385][http://www.rcgroups.com/forums/showpost.php?p=11714861&postcount=386][http://www.rcgroups.com/forums/showpost.php?p=11717320&postcount=390]
;USB interface: [http://www.cs.columbia.edu/~sedwards/classes/2010/4840/Philips-ISP1362-USB-controller.pdf ISP1362BD][http://www.eevblog.com/forum/index.php?topic=3738.msg50242#msg50242]
;LCD controller: [http://pdf.chinaicmart.com/88888/200842210717180.pdf UPS051][http://www.eevblog.com/forum/index.php?topic=3738.msg50503#msg50503] or Himax HX8802-C [http://img683.imageshack.us/img683/6131/rigolds1102e.jpg]

== Software ==
;Firmware size: 4 MB
;Reset vector: 0xFFA0 8000
;Build with: VirtualDSP 4.x
;Operating System: Written from scratch without a OS(?)

=== Boot loader ===
* [http://www.eevblog.com/forum/index.php?topic=30.msg3160#msg3160 SPI secondary boot loader]

=== Command interface ===
* [http://www.rcgroups.com/forums/showpost.php?p=13549739&postcount=727 Some undocumented 488 commands of DS1000E 2.2.2]
* [http://www.rcgroups.com/forums/showpost.php?p=15479444&postcount=912 Some 2.4.0.3 undocumented 488 commands]
* [http://www.rigolna.com/pdfs/Programming_Guides/DS1000E_Programming_Guide.pdf DS1000E Programming Guide]

General Information

2012-01-07T11:24:21Z

Tgaz: /* Command interface */

== Hardware ==
;CPU: [http://www.analog.com/pr/ADSP-BF531 ADSP-BF531]
;Memory:
:Flash EPROM: [http://www.alldatasheet.com/datasheet-pdf/pdf/211252/SPANSION/S29GL064N90TFI040.html S29GL064N90TFI04] - 8MB, 16Bit, DS1052E dump[http://www.eevblog.com/forum/index.php?action=dlattach;topic=30.0;attach=1920]
:Sample RAM: [http://www.issi.com/pdf/61LPS25632TD.pdf IS61LPS25636A-200] - 256kx36, 200MHz @ 250MHz
:Config FRAM: [http://www.ramtron.com/products/nonvolatile-memory/serial-product.aspx?id=55 FM24CL04B] - 4kb non volatile ferroelectric memory, DS1052E dumps[http://www.eevblog.com/forum/index.php?topic=30.msg2783#msg2783][http://www.eevblog.com/forum/index.php?topic=30.msg2788#msg2788]
:SDRAM: [http://www.hynix.com/inc/pdfDownload.jsp?path=/datasheet/pdf/consumer/H57V1262GTR_Series(Rev.1.0).pdf H57V1262GTR] - 4x2x16 Mb (16 MB)
;A/D Converter
:5x [http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad9288/products/product.html AD9288-40] - 8-Bit, 40MHz MSPS Dual A/D Converter @100MHz
;A/D Driver: [http://www.national.com/ds/LM/LMH6552.pdf LMH6552] or [http://www.national.com/ds/LM/LMH6552.pdf LMH6553][http://www.eevblog.com/forum/index.php?topic=30.msg2107#msg2107]?
;A/D references: [http://www.eevblog.com/forum/index.php?topic=30.msg22457#msg22457 Multiplexed DAC]
;Programmable Logic:
:FPGA: Altera Cyclone III EP3C5F256C8N
:CPLD: Lattice Mach XO LCMX0256C-3TN100C
;Logic analyzer driver: National Semi DS90LV047A[http://www.rcgroups.com/forums/showpost.php?p=11714369&postcount=385][http://www.rcgroups.com/forums/showpost.php?p=11714861&postcount=386][http://www.rcgroups.com/forums/showpost.php?p=11717320&postcount=390]
;USB interface: [http://www.cs.columbia.edu/~sedwards/classes/2010/4840/Philips-ISP1362-USB-controller.pdf ISP1362BD][http://www.eevblog.com/forum/index.php?topic=3738.msg50242#msg50242]
;LCD controller: [http://pdf.chinaicmart.com/88888/200842210717180.pdf UPS051][http://www.eevblog.com/forum/index.php?topic=3738.msg50503#msg50503] or Himax HX8802-C [http://img683.imageshack.us/img683/6131/rigolds1102e.jpg]

== Software ==
;Firmware size: 4 MB
;Reset vector: 0xFFA0 8000
;Build with: VirtualDSP 4.x
;Operating System: Written from scratch without a OS(?)

=== Boot loader ===
* [http://www.eevblog.com/forum/index.php?topic=30.msg3160#msg3160 SPI secondary boot loader]

=== Command interface ===
* [http://www.rcgroups.com/forums/showpost.php?p=13549739&postcount=727 Some undocumented 488 commands of DS1000E 2.2.2]
* [http://www.rcgroups.com/forums/showpost.php?p=15479444&postcount=912 Some 2.4 undocumented 488 commands]
* [http://www.rigolna.com/pdfs/Programming_Guides/DS1000E_Programming_Guide.pdf DS1000E Programming Guide]

Hardware/Pictures

2012-01-07T11:18:58Z

Tgaz:

* [http://imageshack.us/photo/my-images/683/rigolds1102e.jpg/ DS1102E main board]
* [http://imageshack.us/photo/my-images/683/1102ebottom.jpg/ DS1102E main board bottom]
* [http://imageshack.us/photo/my-images/21/rigolfrontend.jpg/ DS1102E analog input]
* [http://imageshack.us/photo/my-images/21/rigolpsu.jpg/ DS1102E PSU board]
* [http://imageshack.us/photo/my-images/198/rigol1052vs1102.jpg/ DS1102E vs DS1052E analog input]
* [http://www.eevblog.com/forum/index.php?topic=30.msg20968#msg20968 DS1052E boards]
* [http://www.rcgroups.com/forums/showpost.php?p=11714369&postcount=385 Logic analyzer board]
* [http://www.youtube.com/watch?v=sO5iGwHpmHc DS1052E teardown from EEVblog]

Hardware/Pictures

2012-01-07T11:18:12Z

Tgaz:

Firmware Upgrade

2012-01-06T23:11:33Z

Tgaz: /* Blocks in file */

== Blocks in file ==
This is for 2.5.1.0 of DS1000E.

* It seems each "module" is separate in the firmware upgrade file, with one ZEROFILL after each code one (if BSS data is needed.)
* The only INIT block contains the same bytes as the one preceding it.
** It initializes settings for SDRAM.
*** EBIU_SDRRC = 0x0FFF
*** EBIU_SDBCTL = 0x11 (EBE | EBSZ_16MB | EBCAW_9BITS)
*** EBIU_SDGCTL = 0x0091998D
*** EBIU_AMGCTL = 4 (AMBEN_0_1)
* Things up to 0x0100 0000 are in SDRAM.
* 0xFF80 6000 – 0xFF80 8000 are in Data bank A SRAM
* 0xFFA0 8000 and up is Instruction SRAM

{| border="1" style="text-align: right; font-family: monospace"
!File!!Mem!!Size!!Flags
|-
|0x1f||0xff800060||0x4||IGNORE
|-
|0x2d||0xffa08000||0x98||0x0
|-
|0xcf||0xffa08000||0x2||INIT, contains the same data as 0x2d.
|-
|0xdb||0xff800060||0x4||IGNORE
|-
|0xe9||0x4||0xfffe||0x0
|-
|...
|-
|0xf0161||0xeffe6||0x2b2||0x0
|-
|0xf041d||0x19e000||0x192||0x0
|-
|0xf05b9||0x608800||0xfffe||0x0
|-
|0x1005c1||0x6187fe||0xe920||0x0
|-
|0x10eeeb||0x680000||0xfffe||0x0
|-
|0x11eef3||0x68fffe||0x4cae||0x0
|-
|0x123bab||0x6c0000||0x4||0x0
|-
|0x123bb9||0x6c0008||0xd6||0x0
|-
|0x123c99||0x6c00de||0x10||ZEROFILL
|-
|...
|-
|0x143175||0xff806000||0xf34||0x1
|-
|0x14317f||0xff806f34||0x2||0x0
|-
|0x14318b||0xff806f36||0x402||0x1
|-
|0x143195||0xff807338||0x2||0x0
|-
|0x1431a1||0xff80733a||0x3e4||0x1
|-
|0x1431ab||0xff80771e||0x2||0x0
|-
|0x1431b7||0xff807720||0x336||0x1
|-
|0x1431c1||0xff807a56||0x2||0x0
|-
|0x1431cd||0xffa08000||0x156||0x0
|-
|0x14332d||0xffa08158||0x6954||FINAL
|}

Firmware Upgrade

2012-01-06T22:44:40Z

Tgaz: /* Blocks in file */

== Blocks in file ==
This is for 2.5.1.0 of DS1000E.

* It seems each "module" is separate in the firmware upgrade file, with one ZEROFILL after each code one (if BSS data is needed.)
* The only INIT block contains the same bytes as the one preceding it.
** It initializes settings for SDRAM.
*** EBIU_SDRRC = 0x0FFF
*** EBIU_SDBCTL = 0x11 (EBE | EBSZ_16MB | EBCAW_9BITS)
*** EBIU_SDGCTL = 0x0091998D
*** EBIU_AMGCTL = 4 (AMBEN_0_1)
* Things up to 0x0800 0000 are in SDRAM.
* 0xFF80 6000 – 0xFF80 8000 are in Data bank A SRAM
* 0xFFA0 8000 and up is Instruction SRAM

{| border="1" style="text-align: right; font-family: monospace"
!File!!Mem!!Size!!Flags
|-
|0x1f||0xff800060||0x4||IGNORE
|-
|0x2d||0xffa08000||0x98||0x0
|-
|0xcf||0xffa08000||0x2||INIT, contains the same data as 0x2d.
|-
|0xdb||0xff800060||0x4||IGNORE
|-
|0xe9||0x4||0xfffe||0x0
|-
|...
|-
|0xf0161||0xeffe6||0x2b2||0x0
|-
|0xf041d||0x19e000||0x192||0x0
|-
|0xf05b9||0x608800||0xfffe||0x0
|-
|0x1005c1||0x6187fe||0xe920||0x0
|-
|0x10eeeb||0x680000||0xfffe||0x0
|-
|0x11eef3||0x68fffe||0x4cae||0x0
|-
|0x123bab||0x6c0000||0x4||0x0
|-
|0x123bb9||0x6c0008||0xd6||0x0
|-
|0x123c99||0x6c00de||0x10||ZEROFILL
|-
|...
|-
|0x143175||0xff806000||0xf34||0x1
|-
|0x14317f||0xff806f34||0x2||0x0
|-
|0x14318b||0xff806f36||0x402||0x1
|-
|0x143195||0xff807338||0x2||0x0
|-
|0x1431a1||0xff80733a||0x3e4||0x1
|-
|0x1431ab||0xff80771e||0x2||0x0
|-
|0x1431b7||0xff807720||0x336||0x1
|-
|0x1431c1||0xff807a56||0x2||0x0
|-
|0x1431cd||0xffa08000||0x156||0x0
|-
|0x14332d||0xffa08158||0x6954||FINAL
|}

Firmware Upgrade

2012-01-06T22:26:16Z

Tgaz: /* Blocks in file */

== Blocks in file ==
This is for 2.5.1.0 of DS1000E.

* It seems each "module" is separate in the firmware upgrade file, with one ZEROFILL after each code one (if BSS data is needed.)
* The only INIT block contains the same bytes as the one preceding it.
* Things up to 0x0800 0000 are in SDRAM.
* 0xFF80 6000 – 0xFF80 8000 are in Data bank A SRAM
* 0xFFA0 8000 and up is Instruction SRAM

{| border="1" style="text-align: right; font-family: monospace"
!File!!Mem!!Size!!Flags
|-
|0x1f||0xff800060||0x4||IGNORE
|-
|0x2d||0xffa08000||0x98||0x0
|-
|0xcf||0xffa08000||0x2||INIT, contains the same data as 0x2d.
|-
|0xdb||0xff800060||0x4||IGNORE
|-
|0xe9||0x4||0xfffe||0x0
|-
|...
|-
|0xf0161||0xeffe6||0x2b2||0x0
|-
|0xf041d||0x19e000||0x192||0x0
|-
|0xf05b9||0x608800||0xfffe||0x0
|-
|0x1005c1||0x6187fe||0xe920||0x0
|-
|0x10eeeb||0x680000||0xfffe||0x0
|-
|0x11eef3||0x68fffe||0x4cae||0x0
|-
|0x123bab||0x6c0000||0x4||0x0
|-
|0x123bb9||0x6c0008||0xd6||0x0
|-
|0x123c99||0x6c00de||0x10||ZEROFILL
|-
|...
|-
|0x143175||0xff806000||0xf34||0x1
|-
|0x14317f||0xff806f34||0x2||0x0
|-
|0x14318b||0xff806f36||0x402||0x1
|-
|0x143195||0xff807338||0x2||0x0
|-
|0x1431a1||0xff80733a||0x3e4||0x1
|-
|0x1431ab||0xff80771e||0x2||0x0
|-
|0x1431b7||0xff807720||0x336||0x1
|-
|0x1431c1||0xff807a56||0x2||0x0
|-
|0x1431cd||0xffa08000||0x156||0x0
|-
|0x14332d||0xffa08158||0x6954||FINAL
|}

Firmware Upgrade

2012-01-06T22:25:39Z

Tgaz: /* Blocks in file */

== Blocks in file ==
This is for 2.5.1.0 of DS1000E.

* It seems each "module" is separate in the firmware upgrade file, with one ZEROFILL after each code one.
* The only INIT block contains the same bytes as the one preceding it.
* Things up to 0x0800 0000 are in SDRAM.
* 0xFF80 6000 – 0xFF80 8000 are in Data bank A SRAM
* 0xFFA0 8000 and up is Instruction SRAM

{| border="1" style="text-align: right; font-family: monospace"
!File!!Mem!!Size!!Flags
|-
|0x1f||0xff800060||0x4||IGNORE
|-
|0x2d||0xffa08000||0x98||0x0
|-
|0xcf||0xffa08000||0x2||INIT, contains the same data as 0x2d.
|-
|0xdb||0xff800060||0x4||IGNORE
|-
|0xe9||0x4||0xfffe||0x0
|-
|...
|-
|0xf0161||0xeffe6||0x2b2||0x0
|-
|0xf041d||0x19e000||0x192||0x0
|-
|0xf05b9||0x608800||0xfffe||0x0
|-
|0x1005c1||0x6187fe||0xe920||0x0
|-
|0x10eeeb||0x680000||0xfffe||0x0
|-
|0x11eef3||0x68fffe||0x4cae||0x0
|-
|0x123bab||0x6c0000||0x4||0x0
|-
|0x123bb9||0x6c0008||0xd6||0x0
|-
|0x123c99||0x6c00de||0x10||ZEROFILL
|-
|...
|-
|0x143175||0xff806000||0xf34||0x1
|-
|0x14317f||0xff806f34||0x2||0x0
|-
|0x14318b||0xff806f36||0x402||0x1
|-
|0x143195||0xff807338||0x2||0x0
|-
|0x1431a1||0xff80733a||0x3e4||0x1
|-
|0x1431ab||0xff80771e||0x2||0x0
|-
|0x1431b7||0xff807720||0x336||0x1
|-
|0x1431c1||0xff807a56||0x2||0x0
|-
|0x1431cd||0xffa08000||0x156||0x0
|-
|0x14332d||0xffa08158||0x6954||FINAL
|}

Firmware Upgrade

2012-01-06T22:25:15Z

Tgaz: /* Blocks in file */

Firmware Upgrade

2012-01-06T20:42:56Z

Tgaz: Created page with "== Blocks in file == This is for 2.5 of DS1000E. {| border="1" style="text-align: right; font-family: monospace" !File!!Mem!!Size!!Flags |- |0x1f||0xff800060||0x4||IGNORE |- |0x..."

== Blocks in file ==
This is for 2.5 of DS1000E.

{| border="1" style="text-align: right; font-family: monospace"
!File!!Mem!!Size!!Flags
|-
|0x1f||0xff800060||0x4||IGNORE
|-
|0x2d||0xffa08000||0x98||0x0
|-
|0xcf||0xffa08000||0x2||INIT
|-
|0xdb||0xff800060||0x4||IGNORE
|-
|0xe9||0x4||0xfffe||0x0
|-
|0x100f1||0x10002||0xfffe||0x0
|-
|0x200f9||0x20000||0xfffe||0x0
|-
|0x30101||0x2fffe||0xfffe||0x0
|-
|0x40109||0x3fffc||0xfffe||0x0
|-
|0x50111||0x4fffa||0xfffe||0x0
|-
|0x60119||0x5fff8||0xfffe||0x0
|-
|0x70121||0x6fff6||0xfffe||0x0
|-
|0x80129||0x7fff4||0xfffe||0x0
|-
|0x90131||0x8fff2||0xfffe||0x0
|-
|0xa0139||0x9fff0||0xfffe||0x0
|-
|0xb0141||0xaffee||0xfffe||0x0
|-
|0xc0149||0xbffec||0xfffe||0x0
|-
|0xd0151||0xcffea||0xfffe||0x0
|-
|0xe0159||0xdffe8||0xfffe||0x0
|-
|0xf0161||0xeffe6||0x2b2||0x0
|-
|0xf041d||0x19e000||0x192||0x0
|-
|0xf05b9||0x608800||0xfffe||0x0
|-
|0x1005c1||0x6187fe||0xe920||0x0
|-
|0x10eeeb||0x680000||0xfffe||0x0
|-
|0x11eef3||0x68fffe||0x4cae||0x0
|-
|0x123bab||0x6c0000||0x4||0x0
|-
|0x123bb9||0x6c0008||0xd6||0x0
|-
|0x123c99||0x6c00de||0x10||ZEROFILL
|-
|0x123cb3||0x40000000||0x0||0x82c3
|}

Main Page

2012-01-06T20:38:23Z

Tgaz:

{{:Main Page/Welcome}}

{{col-begin}}
{{col-2}}
{{HeadingA|Toolchain}}
====Getting started====
* [[Build the Toolchain]]
* [[Patch your Firmware]]
* [[Start Development]]

{{col-2}}
{{HeadingB|Reverse Engineering}}
* [[General Information]]

====Software====
* [[Mapfile]]
* [[Flirt Signatures]]
* [[Firmware Upgrade]]

====Hardware====
* [[JTAG]]
* [[Schematics]]
* [[Hardware/Pictures]]
* [[Hardware/References]]

{{col-end}}

{{col-begin}}
{{col-2}}
{{HeadingA|Applications & Guides}}

====Applications====
====Tutorials====
====Ideas====
* [[Waterfall Plot for FFT]]
* [[Protocol Analyzer]]
* [[Software Defined Radio]]

{{col-2}}
{{HeadingB|Developers & Writers}}

* [[User:krater|krater (Andreas Schuler)]]
* [[user:A Helene|A Helene]]

{{col-end}}

{| border="1" class="wikitable" style="background-color:orange; width:100%;"
|-
|colspan="4" style="background-color:orange; text-align:center;"| [[Disclaimer]]
|}

__NOTOC____NOEDITSECTION__

Main Page

2012-01-06T20:38:14Z

Tgaz:

{{:Main Page/Welcome}}

{{col-begin}}
{{col-2}}
{{HeadingA|Toolchain}}
====Getting started====
* [[Build the Toolchain]]
* [[Patch your Firmware]]
* [[Start Development]]

{{col-2}}
{{HeadingB|Reverse Engineering}}
* [[General Information]]

====Software====
* [[Mapfile]]
* [[Flirt Signatures]]
* [[Firmware upgrade]]

====Hardware====
* [[JTAG]]
* [[Schematics]]
* [[Hardware/Pictures]]
* [[Hardware/References]]

{{col-end}}

{{col-begin}}
{{col-2}}
{{HeadingA|Applications & Guides}}

====Applications====
====Tutorials====
====Ideas====
* [[Waterfall Plot for FFT]]
* [[Protocol Analyzer]]
* [[Software Defined Radio]]

{{col-2}}
{{HeadingB|Developers & Writers}}

* [[User:krater|krater (Andreas Schuler)]]
* [[user:A Helene|A Helene]]

{{col-end}}

{| border="1" class="wikitable" style="background-color:orange; width:100%;"
|-
|colspan="4" style="background-color:orange; text-align:center;"| [[Disclaimer]]
|}

__NOTOC____NOEDITSECTION__

General Information

2012-01-06T19:51:07Z

Tgaz: /* Hardware */

== Hardware ==
;CPU: [http://www.analog.com/pr/ADSP-BF531 ADSP-BF531]
;Memory:
:Flash EPROM: [http://www.alldatasheet.com/datasheet-pdf/pdf/211252/SPANSION/S29GL064N90TFI040.html S29GL064N90TFI04] - 8MB, 16Bit, DS1052E dump[http://www.eevblog.com/forum/index.php?action=dlattach;topic=30.0;attach=1920]
:Sample RAM: [http://www.issi.com/pdf/61LPS25632TD.pdf IS61LPS25636A-200] - 256kx36, 200MHz @ 250MHz
:Config FRAM: [http://www.ramtron.com/products/nonvolatile-memory/serial-product.aspx?id=55 FM24CL04B] - 4kb non volatile ferroelectric memory, DS1052E dumps[http://www.eevblog.com/forum/index.php?topic=30.msg2783#msg2783][http://www.eevblog.com/forum/index.php?topic=30.msg2788#msg2788]
:SDRAM: [http://www.hynix.com/inc/pdfDownload.jsp?path=/datasheet/pdf/consumer/H57V1262GTR_Series(Rev.1.0).pdf H57V1262GTR] - 4x2x16 Mb (16 MB)
;A/D Converter
:5x [http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad9288/products/product.html AD9288-40] - 8-Bit, 40MHz MSPS Dual A/D Converter @100MHz
;A/D Driver: [http://www.national.com/ds/LM/LMH6552.pdf LMH6552] or [http://www.national.com/ds/LM/LMH6552.pdf LMH6553][http://www.eevblog.com/forum/index.php?topic=30.msg2107#msg2107]?
;A/D references: [http://www.eevblog.com/forum/index.php?topic=30.msg22457#msg22457 Multiplexed DAC]
;Programmable Logic:
:FPGA: Altera Cyclone III EP3C5F256C8N
:CPLD: Lattice Mach XO LCMX0256C-3TN100C
;Logic analyzer driver: National Semi DS90LV047A[http://www.rcgroups.com/forums/showpost.php?p=11714369&postcount=385][http://www.rcgroups.com/forums/showpost.php?p=11714861&postcount=386][http://www.rcgroups.com/forums/showpost.php?p=11717320&postcount=390]
;USB interface: [http://www.cs.columbia.edu/~sedwards/classes/2010/4840/Philips-ISP1362-USB-controller.pdf ISP1362BD][http://www.eevblog.com/forum/index.php?topic=3738.msg50242#msg50242]
;LCD controller: [http://pdf.chinaicmart.com/88888/200842210717180.pdf UPS051][http://www.eevblog.com/forum/index.php?topic=3738.msg50503#msg50503]

== Software ==
;Firmware size: 4 MB
;Reset vector: 0xFFA0 8000
;Build with: VirtualDSP 4.x
;Operating System: Written from scratch without a OS(?)

=== Boot loader ===
* [http://www.eevblog.com/forum/index.php?topic=30.msg3160#msg3160 SPI secondary boot loader]

=== Command interface ===
* [http://www.rcgroups.com/forums/showpost.php?p=13549739&postcount=727 Some undocumented 488 commands]
* [http://www.rcgroups.com/forums/showpost.php?p=15479444&postcount=912 Some 2.4 undocumented 488 commands]
* [http://www.rigolna.com/pdfs/Programming_Guides/DS1000E_Programming_Guide.pdf DS1000E Programming Guide]

General Information

2012-01-06T19:48:59Z

Tgaz: /* Hardware */

== Hardware ==
;CPU: [http://www.analog.com/pr/ADSP-BF531 ADSP-BF531]
;Memory:
:Flash EPROM: [http://www.alldatasheet.com/datasheet-pdf/pdf/211252/SPANSION/S29GL064N90TFI040.html S29GL064N90TFI04] - 8MB, 16Bit, DS1052E dump[http://www.eevblog.com/forum/index.php?action=dlattach;topic=30.0;attach=1920]
:Sample RAM: [http://www.issi.com/pdf/61LPS25632TD.pdf IS61LPS25636A-200] - 256Kx36, 200MHz @ 250MHz
:Config FRAM: [http://www.ramtron.com/products/nonvolatile-memory/serial-product.aspx?id=55 FM24CL04B] - 4kb non volatile ferroelectric memory, DS1052E dumps[http://www.eevblog.com/forum/index.php?topic=30.msg2783#msg2783][http://www.eevblog.com/forum/index.php?topic=30.msg2788#msg2788]
:SDRAM: [http://www.hynix.com/inc/pdfDownload.jsp?path=/datasheet/pdf/consumer/H57V1262GTR_Series(Rev.1.0).pdf H57V1262GTR]
;A/D Converter
:5x [http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad9288/products/product.html AD9288-40] - 8-Bit, 40MHz MSPS Dual A/D Converter @100MHz
;A/D Driver: [http://www.national.com/ds/LM/LMH6552.pdf LMH6552] or [http://www.national.com/ds/LM/LMH6552.pdf LMH6553][http://www.eevblog.com/forum/index.php?topic=30.msg2107#msg2107]?
;A/D references: [http://www.eevblog.com/forum/index.php?topic=30.msg22457#msg22457 Multiplexed DAC]
;Programmable Logic:
:FPGA: Altera Cyclone III EP3C5F256C8N
:CPLD: Lattice Mach XO LCMX0256C-3TN100C
;Logic analyzer driver: National Semi DS90LV047A[http://www.rcgroups.com/forums/showpost.php?p=11714369&postcount=385][http://www.rcgroups.com/forums/showpost.php?p=11714861&postcount=386][http://www.rcgroups.com/forums/showpost.php?p=11717320&postcount=390]
;USB interface: [http://www.cs.columbia.edu/~sedwards/classes/2010/4840/Philips-ISP1362-USB-controller.pdf ISP1362BD][http://www.eevblog.com/forum/index.php?topic=3738.msg50242#msg50242]
;LCD controller: [http://pdf.chinaicmart.com/88888/200842210717180.pdf UPS051][http://www.eevblog.com/forum/index.php?topic=3738.msg50503#msg50503]

== Software ==
;Firmware size: 4 MB
;Reset vector: 0xFFA0 8000
;Build with: VirtualDSP 4.x
;Operating System: Written from scratch without a OS(?)

=== Boot loader ===
* [http://www.eevblog.com/forum/index.php?topic=30.msg3160#msg3160 SPI secondary boot loader]

=== Command interface ===
* [http://www.rcgroups.com/forums/showpost.php?p=13549739&postcount=727 Some undocumented 488 commands]
* [http://www.rcgroups.com/forums/showpost.php?p=15479444&postcount=912 Some 2.4 undocumented 488 commands]
* [http://www.rigolna.com/pdfs/Programming_Guides/DS1000E_Programming_Guide.pdf DS1000E Programming Guide]

General Information

2012-01-06T19:48:31Z

Tgaz: /* Hardware */

== Hardware ==
;CPU: [http://www.analog.com/pr/ADSP-BF531 ADSP-BF531]
;Memory:
:Flash EPROM: [http://www.alldatasheet.com/datasheet-pdf/pdf/211252/SPANSION/S29GL064N90TFI040.html S29GL064N90TFI04] - 8MB, 16Bit, DS1052E dump[http://www.eevblog.com/forum/index.php?action=dlattach;topic=30.0;attach=1920]
:Sample RAM: [http://www.issi.com/pdf/61LPS25632TD.pdf IS61LPS25636A-200] - 256Kx36, 200MHz @ 250MHz
:Config FRAM: [http://www.ramtron.com/products/nonvolatile-memory/serial-product.aspx?id=55 FM24CL04B] - 4kb non volatile ferroelectric memory, DS1052E dumps[http://www.eevblog.com/forum/index.php?topic=30.msg2783#msg2783][http://www.eevblog.com/forum/index.php?topic=30.msg2788#msg2788]
;SDRAM: [http://www.hynix.com/inc/pdfDownload.jsp?path=/datasheet/pdf/consumer/H57V1262GTR_Series(Rev.1.0).pdf H57V1262GTR]
;A/D Converter
:5x [http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad9288/products/product.html AD9288-40] - 8-Bit, 40MHz MSPS Dual A/D Converter @100MHz
;A/D Driver: [http://www.national.com/ds/LM/LMH6552.pdf LMH6552] or [http://www.national.com/ds/LM/LMH6552.pdf LMH6553][http://www.eevblog.com/forum/index.php?topic=30.msg2107#msg2107]?
;A/D references: [http://www.eevblog.com/forum/index.php?topic=30.msg22457#msg22457 Multiplexed DAC]
;Programmable Logic:
:FPGA: Altera Cyclone III EP3C5F256C8N
:CPLD: Lattice Mach XO LCMX0256C-3TN100C
;Logic analyzer driver: National Semi DS90LV047A[http://www.rcgroups.com/forums/showpost.php?p=11714369&postcount=385][http://www.rcgroups.com/forums/showpost.php?p=11714861&postcount=386][http://www.rcgroups.com/forums/showpost.php?p=11717320&postcount=390]
;USB interface: [http://www.cs.columbia.edu/~sedwards/classes/2010/4840/Philips-ISP1362-USB-controller.pdf ISP1362BD][http://www.eevblog.com/forum/index.php?topic=3738.msg50242#msg50242]
;LCD controller: [http://pdf.chinaicmart.com/88888/200842210717180.pdf UPS051][http://www.eevblog.com/forum/index.php?topic=3738.msg50503#msg50503]

== Software ==
;Firmware size: 4 MB
;Reset vector: 0xFFA0 8000
;Build with: VirtualDSP 4.x
;Operating System: Written from scratch without a OS(?)

=== Boot loader ===
* [http://www.eevblog.com/forum/index.php?topic=30.msg3160#msg3160 SPI secondary boot loader]

=== Command interface ===
* [http://www.rcgroups.com/forums/showpost.php?p=13549739&postcount=727 Some undocumented 488 commands]
* [http://www.rcgroups.com/forums/showpost.php?p=15479444&postcount=912 Some 2.4 undocumented 488 commands]
* [http://www.rigolna.com/pdfs/Programming_Guides/DS1000E_Programming_Guide.pdf DS1000E Programming Guide]

General Information

2012-01-06T18:09:15Z

Tgaz: /* Hardware */

== Hardware ==
;CPU: [http://www.analog.com/pr/ADSP-BF531 ADSP-BF531]
;Memory:
:Flash EPROM: [http://www.alldatasheet.com/datasheet-pdf/pdf/211252/SPANSION/S29GL064N90TFI040.html S29GL064N90TFI04] - 8MB, 16Bit, DS1052E dump[http://www.eevblog.com/forum/index.php?action=dlattach;topic=30.0;attach=1920]
:Sample RAM: [http://www.issi.com/pdf/61LPS25632TD.pdf IS61LPS25636A-200] - 256Kx36, 200MHz @ 250MHz
:Config FRAM: [http://www.ramtron.com/products/nonvolatile-memory/serial-product.aspx?id=55 FM24CL04B] - 4kb non volatile ferroelectric memory, DS1052E dumps[http://www.eevblog.com/forum/index.php?topic=30.msg2783#msg2783][http://www.eevblog.com/forum/index.php?topic=30.msg2788#msg2788]
;A/D Converter
:5x [http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad9288/products/product.html AD9288-40] - 8-Bit, 40MHz MSPS Dual A/D Converter @100MHz
;A/D Driver: [http://www.national.com/ds/LM/LMH6552.pdf LMH6552] or [http://www.national.com/ds/LM/LMH6552.pdf LMH6553][http://www.eevblog.com/forum/index.php?topic=30.msg2107#msg2107]?
;A/D references: [http://www.eevblog.com/forum/index.php?topic=30.msg22457#msg22457 Multiplexed DAC]
;Programmable Logic:
:FPGA: Altera Cyclone III EP3C5F256C8N
:CPLD: Lattice Mach XO LCMX0256C-3TN100C
;Logic analyzer driver: National Semi DS90LV047A[http://www.rcgroups.com/forums/showpost.php?p=11714369&postcount=385][http://www.rcgroups.com/forums/showpost.php?p=11714861&postcount=386][http://www.rcgroups.com/forums/showpost.php?p=11717320&postcount=390]
;USB interface: [http://www.cs.columbia.edu/~sedwards/classes/2010/4840/Philips-ISP1362-USB-controller.pdf ISP1362BD][http://www.eevblog.com/forum/index.php?topic=3738.msg50242#msg50242]
;LCD controller: [http://pdf.chinaicmart.com/88888/200842210717180.pdf UPS051][http://www.eevblog.com/forum/index.php?topic=3738.msg50503#msg50503]

== Software ==
;Firmware size: 4 MB
;Reset vector: 0xFFA0 8000
;Build with: VirtualDSP 4.x
;Operating System: Written from scratch without a OS(?)

=== Boot loader ===
* [http://www.eevblog.com/forum/index.php?topic=30.msg3160#msg3160 SPI secondary boot loader]

=== Command interface ===
* [http://www.rcgroups.com/forums/showpost.php?p=13549739&postcount=727 Some undocumented 488 commands]
* [http://www.rcgroups.com/forums/showpost.php?p=15479444&postcount=912 Some 2.4 undocumented 488 commands]
* [http://www.rigolna.com/pdfs/Programming_Guides/DS1000E_Programming_Guide.pdf DS1000E Programming Guide]

General Information

2012-01-06T14:40:05Z

Tgaz: /* Hardware */

== Hardware ==
;CPU: [http://www.analog.com/pr/ADSP-BF531 ADSP-BF531]
;Memory:
:Flash EPROM: [http://www.alldatasheet.com/datasheet-pdf/pdf/211252/SPANSION/S29GL064N90TFI040.html S29GL064N90TFI04] - 8MB, 16Bit, DS1052E dump[http://www.eevblog.com/forum/index.php?action=dlattach;topic=30.0;attach=1920]
:Sample RAM: [http://www.issi.com/pdf/61LPS25632TD.pdf IS61LPS25636A-200] - 256Kx36, 200MHz @ 250MHz
:Config FRAM: [http://www.ramtron.com/products/nonvolatile-memory/serial-product.aspx?id=55 FM24CL04B] - 4kb non volatile ferroelectric memory, DS1052E dumps[http://www.eevblog.com/forum/index.php?topic=30.msg2783#msg2783][http://www.eevblog.com/forum/index.php?topic=30.msg2788#msg2788]
;A/D Converter
:5x [http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad9288/products/product.html AD9288-40] - 8-Bit, 40MHz MSPS Dual A/D Converter @100MHz
;A/D Driver: [http://www.national.com/ds/LM/LMH6552.pdf LMH6552] or [http://www.national.com/ds/LM/LMH6552.pdf LMH6553][http://www.eevblog.com/forum/index.php?topic=30.msg2107#msg2107]?
;A/D references: [http://www.eevblog.com/forum/index.php?topic=30.msg22457#msg22457 Multiplexed DAC]
;Programmable Logic:
:FPGA: Altera Cyclone III EP3C5F256C8N
:CPLD: Lattice Mach XO LCMX0256C-3TN100C
;Logic analyzer driver: National Semi DS90LV047A[http://www.rcgroups.com/forums/showpost.php?p=11714369&postcount=385][http://www.rcgroups.com/forums/showpost.php?p=11714861&postcount=386][http://www.rcgroups.com/forums/showpost.php?p=11717320&postcount=390]
;USB interface: [http://www.cs.columbia.edu/~sedwards/classes/2010/4840/Philips-ISP1362-USB-controller.pdf ISP1362BD][http://www.eevblog.com/forum/index.php?topic=3738.msg50242#msg50242]

== Software ==
;Firmware size: 4 MB
;Reset vector: 0xFFA0 8000
;Build with: VirtualDSP 4.x
;Operating System: Written from scratch without a OS(?)

=== Boot loader ===
* [http://www.eevblog.com/forum/index.php?topic=30.msg3160#msg3160 SPI secondary boot loader]

=== Command interface ===
* [http://www.rcgroups.com/forums/showpost.php?p=13549739&postcount=727 Some undocumented 488 commands]
* [http://www.rcgroups.com/forums/showpost.php?p=15479444&postcount=912 Some 2.4 undocumented 488 commands]
* [http://www.rigolna.com/pdfs/Programming_Guides/DS1000E_Programming_Guide.pdf DS1000E Programming Guide]

General Information

2012-01-06T10:37:11Z

Tgaz: /* Hardware */

== Hardware ==
;CPU: [http://www.analog.com/pr/ADSP-BF531 ADSP-BF531]
;Memory:
:Flash EPROM: [http://www.alldatasheet.com/datasheet-pdf/pdf/211252/SPANSION/S29GL064N90TFI040.html S29GL064N90TFI04] - 8MB, 16Bit, DS1052E dump[http://www.eevblog.com/forum/index.php?action=dlattach;topic=30.0;attach=1920]
:Sample RAM: [http://www.issi.com/pdf/61LPS25632TD.pdf IS61LPS25636A-200] - 256Kx36, 200MHz @ 250MHz
:Config FRAM: [http://www.ramtron.com/products/nonvolatile-memory/serial-product.aspx?id=55 FM24CL04B] - 4kb non volatile ferroelectric memory, DS1052E dumps[http://www.eevblog.com/forum/index.php?topic=30.msg2783#msg2783][http://www.eevblog.com/forum/index.php?topic=30.msg2788#msg2788]
;A/D Converter
:5x [http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad9288/products/product.html AD9288-40] - 8-Bit, 40MHz MSPS Dual A/D Converter @100MHz
;A/D Driver: [http://www.national.com/ds/LM/LMH6552.pdf LMH6552] or [http://www.national.com/ds/LM/LMH6552.pdf LMH6553][http://www.eevblog.com/forum/index.php?topic=30.msg2107#msg2107]?
;A/D references: [http://www.eevblog.com/forum/index.php?topic=30.msg22457#msg22457 Multiplexed DAC]
;Programmable Logic:
:FPGA: Altera Cyclone III EP3C5F256C8N
:CPLD: Lattice Mach XO LCMX0256C-3TN100C
;Logic analyzer driver: National Semi DS90LV047A[http://www.rcgroups.com/forums/showpost.php?p=11714369&postcount=385][http://www.rcgroups.com/forums/showpost.php?p=11714861&postcount=386][http://www.rcgroups.com/forums/showpost.php?p=11717320&postcount=390]

== Software ==
;Firmware size: 4 MB
;Reset vector: 0xFFA0 8000
;Build with: VirtualDSP 4.x
;Operating System: Written from scratch without a OS(?)

=== Boot loader ===
* [http://www.eevblog.com/forum/index.php?topic=30.msg3160#msg3160 SPI secondary boot loader]

=== Command interface ===
* [http://www.rcgroups.com/forums/showpost.php?p=13549739&postcount=727 Some undocumented 488 commands]
* [http://www.rcgroups.com/forums/showpost.php?p=15479444&postcount=912 Some 2.4 undocumented 488 commands]
* [http://www.rigolna.com/pdfs/Programming_Guides/DS1000E_Programming_Guide.pdf DS1000E Programming Guide]

Hardware/Pictures

2012-01-06T10:35:43Z

Tgaz:

General Information

2012-01-06T10:34:45Z

Tgaz: /* Hardware */

== Hardware ==
;CPU: [http://www.analog.com/pr/ADSP-BF531 ADSP-BF531]
;Memory:
:Flash EPROM: [http://www.alldatasheet.com/datasheet-pdf/pdf/211252/SPANSION/S29GL064N90TFI040.html S29GL064N90TFI04] - 8MB, 16Bit, DS1052E dump[http://www.eevblog.com/forum/index.php?action=dlattach;topic=30.0;attach=1920]
:Sample RAM: [http://www.issi.com/pdf/61LPS25632TD.pdf IS61LPS25636A-200] - 256Kx36, 200MHz @ 250MHz
:Config FRAM: [http://www.ramtron.com/products/nonvolatile-memory/serial-product.aspx?id=55 FM24CL04B] - 4kb non volatile ferroelectric memory, DS1052E dumps[http://www.eevblog.com/forum/index.php?topic=30.msg2783#msg2783][http://www.eevblog.com/forum/index.php?topic=30.msg2788#msg2788]
;A/D Converter
:5x [http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad9288/products/product.html AD9288-40] - 8-Bit, 40MHz MSPS Dual A/D Converter @100MHz
;A/D Driver: [http://www.national.com/ds/LM/LMH6552.pdf LMH6552] or [http://www.national.com/ds/LM/LMH6552.pdf LMH6553][http://www.eevblog.com/forum/index.php?topic=30.msg2107#msg2107]?
;A/D references: [http://www.eevblog.com/forum/index.php?topic=30.msg22457#msg22457 Multiplexed DAC]
;Programmable Logic:
:FPGA: Altera Cyclone III EP3C5F256C8N
:CPLD: Lattice Mach XO LCMX0256C-3TN100C
;Logic analyzer driver: National Semi DS90LV047A[http://www.rcgroups.com/forums/showpost.php?p=11714369&postcount=385][http://www.rcgroups.com/forums/showpost.php?p=11714861&postcount=386]

== Software ==
;Firmware size: 4 MB
;Reset vector: 0xFFA0 8000
;Build with: VirtualDSP 4.x
;Operating System: Written from scratch without a OS(?)

=== Boot loader ===
* [http://www.eevblog.com/forum/index.php?topic=30.msg3160#msg3160 SPI secondary boot loader]

=== Command interface ===
* [http://www.rcgroups.com/forums/showpost.php?p=13549739&postcount=727 Some undocumented 488 commands]
* [http://www.rcgroups.com/forums/showpost.php?p=15479444&postcount=912 Some 2.4 undocumented 488 commands]
* [http://www.rigolna.com/pdfs/Programming_Guides/DS1000E_Programming_Guide.pdf DS1000E Programming Guide]

General Information

2012-01-05T20:06:32Z

Tgaz: /* Command interface */

General Information

2012-01-05T20:01:50Z

Tgaz: /* Command interface */

General Information

2012-01-05T19:57:46Z

Tgaz: /* Hardware */

Hardware/Pictures

2012-01-05T19:53:17Z

Tgaz:

General Information

2012-01-05T19:47:32Z

Tgaz: /* Hardware */

General Information

2012-01-05T19:19:32Z

Tgaz: /* Software */

== Hardware ==
;CPU: [http://www.analog.com/pr/ADSP-BF531 ADSP-BF531]
;Memory:
:Flash EPROM: [http://www.alldatasheet.com/datasheet-pdf/pdf/211252/SPANSION/S29GL064N90TFI040.html S29GL064N90TFI04] - 8MB, 16Bit
:Sample RAM: [http://www.issi.com/pdf/61LPS25632TD.pdf IS61LPS25636A-200] - 256K x 36 200MHz @ 250MHz
:Config FRAM: [http://www.ramtron.com/products/nonvolatile-memory/serial-product.aspx?id=55 FM24CL04B] - 4kb non volatile ferroelectric memory, DS1052E dumps[http://www.eevblog.com/forum/index.php?topic=30.msg2783#msg2783][http://www.eevblog.com/forum/index.php?topic=30.msg2788#msg2788]
;A/D Converter
:10x [http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad9288/products/product.html AD9288-40] - 8-Bit, 40MHz MSPS Dual A/D Converter @100MHz
;A/D Driver: [http://www.national.com/ds/LM/LMH6552.pdf LMH6552] or [http://www.national.com/ds/LM/LMH6552.pdf LMH6553][http://www.eevblog.com/forum/index.php?topic=30.msg2107#msg2107]?
;Programmable Logic:
:FPGA: Altera Cyclone III EP3C5F256C8N
:CPLD: Lattice Mach XO LCMX0256C-3TN100C

== Software ==
;Firmware size: 4 MB
;Reset vector: 0xFFA0 8000
;Build with: VirtualDSP 4.x
;Operating System: Written from Scratch without a OS(?)

=== Boot loader ===
* [http://www.eevblog.com/forum/index.php?topic=30.msg3160#msg3160 SPI secondary boot loader]

=== Command interface ===
* [http://www.rcgroups.com/forums/showpost.php?p=13549739&postcount=727 Some undocumented 488 commands]

General Information

2012-01-05T19:03:52Z

Tgaz:

== Hardware ==
;CPU: [http://www.analog.com/pr/ADSP-BF531 ADSP-BF531]
;Memory:
:Flash EPROM: [http://www.alldatasheet.com/datasheet-pdf/pdf/211252/SPANSION/S29GL064N90TFI040.html S29GL064N90TFI04] - 8MB, 16Bit
:Sample RAM: [http://www.issi.com/pdf/61LPS25632TD.pdf IS61LPS25636A-200] - 256K x 36 200MHz @ 250MHz
:Config FRAM: [http://www.ramtron.com/products/nonvolatile-memory/serial-product.aspx?id=55 FM24CL04B] - 4kb non volatile ferroelectric memory, DS1052E dumps[http://www.eevblog.com/forum/index.php?topic=30.msg2783#msg2783][http://www.eevblog.com/forum/index.php?topic=30.msg2788#msg2788]
;A/D Converter
:10x [http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad9288/products/product.html AD9288-40] - 8-Bit, 40MHz MSPS Dual A/D Converter @100MHz
;A/D Driver: [http://www.national.com/ds/LM/LMH6552.pdf LMH6552] or [http://www.national.com/ds/LM/LMH6552.pdf LMH6553][http://www.eevblog.com/forum/index.php?topic=30.msg2107#msg2107]?
;Programmable Logic:
:FPGA: Altera Cyclone III EP3C5F256C8N
:CPLD: Lattice Mach XO LCMX0256C-3TN100C

== Software ==
;Firmware size: 4 MB
;Reset vector: 0xFFA0 8000
;Build with: VirtualDSP 4.x
;Operating System: Written from Scratch without a OS(?)

* [http://www.rcgroups.com/forums/showpost.php?p=13549739&postcount=727 Some undocumented 488 commands]

General Information

2012-01-05T19:01:25Z

Tgaz:

== Hardware ==
;CPU: [http://www.analog.com/pr/ADSP-BF531 ADSP-BF531]
;Memory:
:Flash EPROM: [http://www.alldatasheet.com/datasheet-pdf/pdf/211252/SPANSION/S29GL064N90TFI040.html S29GL064N90TFI04] - 8MB, 16Bit
:Sample RAM: [http://www.issi.com/pdf/61LPS25632TD.pdf IS61LPS25636A-200] - 256K x 36 200MHz @ 250MHz
:Config FRAM: [http://www.ramtron.com/products/nonvolatile-memory/serial-product.aspx?id=55 FM24CL04B] - 4kb non volatile ferroelectric memory, DS1052E dumps[http://www.eevblog.com/forum/index.php?topic=30.msg2783#msg2783][http://www.eevblog.com/forum/index.php?topic=30.msg2788#msg2788]
;A/D Converter
:10x [http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad9288/products/product.html AD9288-40] - 8-Bit, 40MHz MSPS Dual A/D Converter @100MHz
;A/D Driver: [http://www.national.com/ds/LM/LMH6552.pdf LMH6552] or [http://www.national.com/ds/LM/LMH6552.pdf LMH6553][http://www.eevblog.com/forum/index.php?topic=30.msg2107#msg2107]?
;Programmable Logic:
:FPGA: Altera Cyclone III EP3C5F256C8N
:CPLD: Lattice Mach XO LCMX0256C-3TN100C

== Software ==
;Firmware size: 4 MB
;Reset vector: 0xFFA0 8000
;Build with: VirtualDSP 4.x
;Operating System: Written from Scratch without a OS(?)

General Information

2012-01-05T18:52:29Z

Tgaz:

== Hardware ==
;CPU: [http://www.analog.com/pr/ADSP-BF531 ADSP-BF531]
;Memory:
:Flash EPROM: [http://www.alldatasheet.com/datasheet-pdf/pdf/211252/SPANSION/S29GL064N90TFI040.html S29GL064N90TFI04] - 8MB, 16Bit
:Sample RAM: [http://www.issi.com/pdf/61LPS25632TD.pdf IS61LPS25636A-200] - 256K x 36 200MHz @ 250MHz
:Config FRAM: [http://www.ramtron.com/products/nonvolatile-memory/serial-product.aspx?id=55 FM24CL04B] - 4kb non volatile ferroelectric memory
;A/D Converter
:10x [http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad9288/products/product.html AD9288-40] - 8-Bit, 40MHz MSPS Dual A/D Converter @100MHz
;A/D Driver: [http://www.national.com/ds/LM/LMH6552.pdf LMH6552] or [http://www.national.com/ds/LM/LMH6552.pdf LMH6553][http://www.eevblog.com/forum/index.php?topic=30.msg2107#msg2107]?
;Programmable Logic:
:FPGA: Altera Cyclone III EP3C5F256C8N
:CPLD: Lattice Mach XO LCMX0256C-3TN100C

== Software ==
;Firmware size: 4 MB
;Reset vector: 0xFFA0 8000
;Build with: VirtualDSP 4.x
;Operating System: Written from Scratch without a OS(?)

Hardware/Pictures

2012-01-05T18:50:57Z

Tgaz:

Hardware/Pictures

2012-01-05T18:45:19Z

Tgaz: Created page with "* [http://imageshack.us/photo/my-images/683/rigolds1102e.jpg/ DS1102E main board] * [http://imageshack.us/photo/my-images/21/rigolfrontend.jpg/ DS1102E analog input] * [http://im..."

* [http://imageshack.us/photo/my-images/683/rigolds1102e.jpg/ DS1102E main board]
* [http://imageshack.us/photo/my-images/21/rigolfrontend.jpg/ DS1102E analog input]
* [http://imageshack.us/photo/my-images/21/rigolpsu.jpg/ DS1102E PSU board]
* [http://imageshack.us/photo/my-images/198/rigol1052vs1102.jpg/ DS1102E vs DS1052E analog input]

Main Page

2012-01-05T18:32:11Z

Tgaz:

{{:Main Page/Welcome}}

{{col-begin}}
{{col-2}}
{{HeadingA|Toolchain}}
====Getting started====
* [[Build the Toolchain]]
* [[Patch your Firmware]]
* [[Start Development]]

{{col-2}}
{{HeadingB|Reverse Engineering}}
* [[General Information]]

====Software====
* [[Mapfile]]
* [[Flirt Signatures]]

====Hardware====
* [[JTAG]]
* [[Schematics]]
* [[Hardware/Pictures]]
* [[Hardware/References]]

{{col-end}}

{{col-begin}}
{{col-2}}
{{HeadingA|Applications & Guides}}

====Applications====
====Tutorials====
====Ideas====
* [[Waterfall Plot for FFT]]
* [[Protocol Analyzer]]
* [[Software Defined Radio]]

{{col-2}}
{{HeadingB|Developers & Writers}}

* [[User:krater|krater (Andreas Schuler)]]
* [[user:A Helene|A Helene]]

{{col-end}}

{| border="1" class="wikitable" style="background-color:orange; width:100%;"
|-
|colspan="4" style="background-color:orange; text-align:center;"| [[Disclaimer]]
|}

__NOTOC____NOEDITSECTION__

Main Page

2012-01-05T11:29:11Z

Tgaz:

{{:Main Page/Welcome}}

{{col-begin}}
{{col-2}}
{{HeadingA|Toolchain}}
====Getting started====
* [[Build the Toolchain]]
* [[Patch your Firmware]]
* [[Start Development]]

{{col-2}}
{{HeadingB|Reverse Engineering}}
* [[General Information]]

====Software====
* [[Mapfile]]
* [[Flirt Signatures]]

====Hardware====
* [[JTAG]]
* [[Schematics]]
* [[Hardware/References]]

{{col-end}}

{{col-begin}}
{{col-2}}
{{HeadingA|Applications & Guides}}

====Applications====
====Tutorials====
====Ideas====
* [[Waterfall Plot for FFT]]
* [[Protocol Analyzer]]
* [[Software Defined Radio]]

{{col-2}}
{{HeadingB|Developers & Writers}}

* [[User:krater|krater (Andreas Schuler)]]
* [[user:A Helene|A Helene]]

{{col-end}}

{| border="1" class="wikitable" style="background-color:orange; width:100%;"
|-
|colspan="4" style="background-color:orange; text-align:center;"| [[Disclaimer]]
|}

__NOTOC____NOEDITSECTION__

Hardware/References

2012-01-05T11:27:31Z

Tgaz: Created page with "A list of relevant information links on the Rigol hardware. == CPU == * [http://www.analog.com/static/imported-files/processor_manuals/bf533_hwr_Rev3.4.pdf Blackfin Processor Ha..."

A list of relevant information links on the Rigol hardware.

== CPU ==
* [http://www.analog.com/static/imported-files/processor_manuals/bf533_hwr_Rev3.4.pdf Blackfin Processor Hardware Reference]
* [http://www.analog.com/static/imported-files/processor_manuals/blackfin_pgr.ref.man.rev1.3.pdf Blackfin Processor Programming Reference]
* [http://www.analog.com/static/imported-files/application_notes/EE-240_Rev4.pdf EE-240: ADSP-BF533 Blackfin Booting Process]

Main Page

2012-01-05T11:25:43Z

Tgaz:

{{:Main Page/Welcome}}

{{col-begin}}
{{col-2}}
{{HeadingA|Toolchain}}
====Getting started====
* [[Build the Toolchain]]
* [[Patch your Firmware]]
* [[Start Development]]

{{col-2}}
{{HeadingB|Reverse Engineering}}
====Software====
* [[General Information]]
* [[Mapfile]]
* [[Flirt Signatures]]

====Hardware====
* [[General Information]]
* [[JTAG]]
* [[Schematics]]
* [[Hardware/References]]

{{col-end}}

{{col-begin}}
{{col-2}}
{{HeadingA|Applications & Guides}}

====Applications====
====Tutorials====
====Ideas====
* [[Waterfall Plot for FFT]]
* [[Protocol Analyzer]]
* [[Software Defined Radio]]

{{col-2}}
{{HeadingB|Developers & Writers}}

* [[User:krater|krater (Andreas Schuler)]]
* [[user:A Helene|A Helene]]

{{col-end}}

{| border="1" class="wikitable" style="background-color:orange; width:100%;"
|-
|colspan="4" style="background-color:orange; text-align:center;"| [[Disclaimer]]
|}

__NOTOC____NOEDITSECTION__

Main Page

2012-01-05T11:24:49Z

Tgaz:

{{:Main Page/Welcome}}

{{col-begin}}
{{col-2}}
{{HeadingA|Toolchain}}
====Getting started====
* [[Build the Toolchain]]
* [[Patch your Firmware]]
* [[Start Development]]

{{col-2}}
{{HeadingB|Reverse Engineering}}
====Software====
* [[General Information]]
* [[Mapfile]]
* [[Flirt Signatures]]

====Hardware====
* [[General Information]]
* [[JTAG]]
* [[Schematics]]
* [[References]]

{{col-end}}

{{col-begin}}
{{col-2}}
{{HeadingA|Applications & Guides}}

====Applications====
====Tutorials====
====Ideas====
* [[Waterfall Plot for FFT]]
* [[Protocol Analyzer]]
* [[Software Defined Radio]]

{{col-2}}
{{HeadingB|Developers & Writers}}

* [[User:krater|krater (Andreas Schuler)]]
* [[user:A Helene|A Helene]]

{{col-end}}

{| border="1" class="wikitable" style="background-color:orange; width:100%;"
|-
|colspan="4" style="background-color:orange; text-align:center;"| [[Disclaimer]]
|}

__NOTOC____NOEDITSECTION__

General Information

2012-01-05T11:12:12Z

Tgaz: /* Software */

== Hardware ==
;CPU: [http://www.analog.com/pr/ADSP-BF531 ADSP-BF531]
;Flash EPROM: 4 MB (or is it 8 MB paged by a bootloader?)

== Software ==
;Firmware size: 4 MB
;Reset vector: 0xFFA0 8000

General Information

2012-01-05T11:01:00Z

Tgaz: Created page with "== Hardware == ;CPU: [http://www.analog.com/pr/ADSP-BF531 ADSP-BF531] ;Flash EPROM: 4 MB (or is it 8 MB paged by a bootloader?) == Software == ;Firmware size: 4 MB"

== Hardware ==
;CPU: [http://www.analog.com/pr/ADSP-BF531 ADSP-BF531]
;Flash EPROM: 4 MB (or is it 8 MB paged by a bootloader?)

== Software ==
;Firmware size: 4 MB

Main Page/Welcome

2012-01-05T09:54:21Z

Tgaz: Remove forced German for mailing list link

{{col-begin}}
{{col-2}}
{{HeadingA|Welcome to the Rigol Homebrew Wiki}}
[[File:Rigol DS1052E.jpg|Rigol DS1052E|400px|right]]
We are a affiliation of some people that wants to open the Rigol oscilloscopes for new software and the open source community. We know that switching the bandwith from 50MHz to 100MHz is cool, but not the only possible improvement we can do.<br>
We've reverse engineered parts of the hard- and software and written a toolchain for building and uploading our own applications.<br>

Actually this wiki is relatively empty, you can only find the toolchain, some schematics and general informations. Hope this will change in the near future. If you want write howto's, add your informations or have another rigol related project, write to [[User:krater|krater]] to get a wiki account.<br><br>

If you want to write your own software or only ever wanted to play pong on your Rigol, the best startpoint is to read the [[Build_the_Toolchain|installation howto]] for the toolchain, patch your firmware and play around with the examples.

For help and more informations, i suggest you to join our [http://groups.google.com/group/rigolhomebrew mailing list] or join our channel #rigolhomebrew at [http://freenode.net/irc_servers.shtml FreeNode]

{{col-end}}

Mapfile

2012-01-05T06:36:40Z

Tgaz:

[[Mapfile for Firmware 02.05.02.00]]

Mapfile

2012-01-05T06:36:33Z

Tgaz:

[[Mapfile for Firmware 02.05.02.00]]

test